Orthopedic Splinting Sheets Medical Thermoplastic Plate
Name: thermoplastic splinting material (LTTP)
Size: 600*900mm
Perforation: 0%, 5%, 10%, 19%, 22%, customized
Usage: Immobilization & sterilization
Applicaton: Orthopedic / rehabilitation
Users: OT/ PT
Certification: CE, SGS
Application Scope
- Used for the fixation of fractures, dislocated joints, ligament soft tissue damage, and tendon damage.
- Used for the fixation of soft tissues such as joint ligaments, nerves, and tendon injuries in post surgery.
- Used for the fixation during conservative treatment or after lesions removal, such as: bone, joint tuberculosis, myelitis, purulent arthritis, primary bone tumor metastasis, etc.
4. Used for orthopaedic and postoperative external fixation, such as bone joint malformation, nerve paralysis, cerebral palsy, pediatric scoliosis.
5. Used for the external fixation after burns and other cosmetic surgery.
6. Used for the production of rehabilitation splint and orthosis.
How works?
- Prepare the materials and tools, set the water bath to 65-70°.
2. Choose the right pre-cut, or cropped the thermoplastic sheet to the right shape.The patients need to learn the entire operating process in order to cooperate well. (e.g. the cotton stockinette is used to protect the skin from scratchings)
3. Put the splint sheet into the 65-70° hot water for 2-3 minutes, it could become soft. Remove it to the worktable, make it dry.
4. Place the splint sheet to the user's body part, mould it to the right shape accordingly. Turn outwards the hard edges, thus to prevent hurts. Adjust the splint to the right angle.
5. Tubular splint could be shaped with two sheets combined together.
6. If a molding work is failed, it can be soften into the hot water and reshape again. Especially used for those who need multiple moldings due to the disappearance of edema.
7. After the splint becomes stiff, adjust the edges to the right status. (Paddings or trimms could be used on the bone protrusions and joints, thus to avoid any crushings)
8. Velcro and elastic bandages are used to fasten the splints on the right position.
9. Window opening can be used for open injury.
Precautions
1. Mould the splint with palm and thenar, avoid a large extent of pull during molding process. Ask the user to maintain the same position until the splint become stiff. The edge of the splint should be rolled out into smooth edges, so as to prevent hurts.
2. The splint can be cleaned with a neutral soapy cold water.
3. Keep the splint away from heat sources. I.g.: open flames or microwave ovens, etc.; If the temperature exceeds 50°, the splint will become soft and deformed.
4. Heating gun is prohibited when the splint is on the user's body part.
5. Repeat use is not be suggested.
Storage: Prevent direct sunlight, away from heat sources, avoid contact with acid-base, oil and corrosive gases.
Shelf life: 3 years
Post-use treatment: Comply with the regular method of hospital conventional medical equipment supplies.
Audited Supplier 
){kind=link}